e27f5f46ba
* Adding vial for a_dux, clog, and cuttlefish. * Removing VIAL_INSECURE * Fixing QK_GESC for default qmk. * Mirroring clog's default keymap formatting. * Removing clog until it's in upstream qmk * Fixing diff between qmk, broken vial keymap, and readme. * Missing newline EOF
1.8 KiB
1.8 KiB
Sepia officinalis
AKA S. officinalis, S.O., "The first one", "Cuttlefish"
34 keys, aggressive pinky stagger with top pinky key omitted.
Keyboard Info
- Keyboard Maintainer: @tapioki
- Hardware Supported: Sepia officinalis
- Hardware Availability: Order PCBs with gerber files from the repository
Make example for this keyboard (after setting up your build environment):
make cuttlefish:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Setting Handedness
Firmware uses handedness by EEPROM as default and it must be configured once on each side. The make commands are:
make cuttlefish:default:dfu-split-left
make cuttlefish:default:dfu-split-right
QMK Toolbox can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
- Physical reset pins: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.
- Keycode in layout: Press the key mapped to
QK_BOOTif it is configured.