|
…
|
||
|---|---|---|
| .. | ||
| pro_h | ||
| pro_s | ||
| readme.md | ||
WiredIn Protagonist
- Keyboard Maintainer: Gondolindrim
- Hardware Supported: proprietary PCB using STM32F411 microcontroller;
- Hardware Availability: the Protagonist entered Group Buy in february 2024 and as of april 2025 there were no more public sales.
The Protagonist is a 60% keyboard designed by WiredIn and PCB designed by Gondolindrim, who is also the firwmare maintainer.
How to flash
Enter bootloader
The DFU state in the bootloader can be accessed in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (escape in the default keymap) and plug in the keyboard;
- Physical reset button: press the button on the back of the PCB and hold it for 5 seconds;
- Keycode in layout: Press the key mapped to
RESET; in the default layout, that is top left key ('escape') in layer 1.
How to compile and flash
The Protagonist has two PCB versions: PRO-S (solderable) and PRO-H (hotswap). After checking what PCB you own and setting up your build environment, you can compile the default keymap by using one of the options below.
make wiredin/protagonist/<version>:default
Where <version> can be pro_s or pro_h. And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use:
make wiredin/protagonist/<version>:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.