Merge remote-tracking branch 'qmk/master' into merge-2023-12-16

This commit is contained in:
Ilya Zhuravlev 2023-12-16 10:48:34 -06:00
commit 66574eb854
6566 changed files with 124240 additions and 243032 deletions

View file

@ -38,18 +38,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 00 <-> GND
// 01 <-> SCL
// 10 <-> SDA
// 11 <-> VCC
// ADDR1 represents A1:A0 of the 7-bit address.
// ADDR2 represents A3:A2 of the 7-bit address.
// The result is: 0b101(ADDR2)(ADDR1)
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_COUNT 1
#define IS31FL3733_I2C_ADDRESS_1 IS31FL3733_I2C_ADDRESS_GND_GND
#define RGB_MATRIX_LED_COUNT 64
// RGB Matrix Animation modes. Explicitly enabled

View file

@ -17,7 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "quantum.h"
const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
const is31fl3733_led_t PROGMEM g_is31fl3733_leds[RGB_MATRIX_LED_COUNT] = {
/* Refer to IS31 manual for these locations
* driver
* | R location

View file

@ -15,6 +15,7 @@
"diode_direction": "COL2ROW",
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
"community_layouts": ["68_ansi", "68_iso"],
"layouts": {
"LAYOUT_all": {
"layout": [
@ -261,6 +262,88 @@
{"matrix": [4, 15], "x": 16.25, "y": 4}
]
},
"LAYOUT_68_ansi_split_bs_rshift": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [2, 14], "x": 13, "y": 0},
{"matrix": [0, 13], "x": 14, "y": 0},
{"matrix": [0, 14], "x": 15.25, "y": 0},
{"matrix": [0, 15], "x": 16.25, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 1], "x": 1.5, "y": 1},
{"matrix": [1, 2], "x": 2.5, "y": 1},
{"matrix": [1, 3], "x": 3.5, "y": 1},
{"matrix": [1, 4], "x": 4.5, "y": 1},
{"matrix": [1, 5], "x": 5.5, "y": 1},
{"matrix": [1, 6], "x": 6.5, "y": 1},
{"matrix": [1, 7], "x": 7.5, "y": 1},
{"matrix": [1, 8], "x": 8.5, "y": 1},
{"matrix": [1, 9], "x": 9.5, "y": 1},
{"matrix": [1, 10], "x": 10.5, "y": 1},
{"matrix": [1, 11], "x": 11.5, "y": 1},
{"matrix": [1, 12], "x": 12.5, "y": 1},
{"matrix": [1, 13], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [1, 14], "x": 15.25, "y": 1},
{"matrix": [1, 15], "x": 16.25, "y": 1},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 1], "x": 1.75, "y": 2},
{"matrix": [2, 2], "x": 2.75, "y": 2},
{"matrix": [2, 3], "x": 3.75, "y": 2},
{"matrix": [2, 4], "x": 4.75, "y": 2},
{"matrix": [2, 5], "x": 5.75, "y": 2},
{"matrix": [2, 6], "x": 6.75, "y": 2},
{"matrix": [2, 7], "x": 7.75, "y": 2},
{"matrix": [2, 8], "x": 8.75, "y": 2},
{"matrix": [2, 9], "x": 9.75, "y": 2},
{"matrix": [2, 10], "x": 10.75, "y": 2},
{"matrix": [2, 11], "x": 11.75, "y": 2},
{"matrix": [2, 13], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 13], "x": 14, "y": 3},
{"matrix": [3, 14], "x": 15.25, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 12], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 14.25, "y": 4},
{"matrix": [4, 14], "x": 15.25, "y": 4},
{"matrix": [4, 15], "x": 16.25, "y": 4}
]
},
"LAYOUT_68_ansi_split_rshift": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
@ -342,6 +425,89 @@
{"matrix": [4, 15], "x": 16.25, "y": 4}
]
},
"LAYOUT_68_iso_split_bs_rshift": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [0, 1], "x": 1, "y": 0},
{"matrix": [0, 2], "x": 2, "y": 0},
{"matrix": [0, 3], "x": 3, "y": 0},
{"matrix": [0, 4], "x": 4, "y": 0},
{"matrix": [0, 5], "x": 5, "y": 0},
{"matrix": [0, 6], "x": 6, "y": 0},
{"matrix": [0, 7], "x": 7, "y": 0},
{"matrix": [0, 8], "x": 8, "y": 0},
{"matrix": [0, 9], "x": 9, "y": 0},
{"matrix": [0, 10], "x": 10, "y": 0},
{"matrix": [0, 11], "x": 11, "y": 0},
{"matrix": [0, 12], "x": 12, "y": 0},
{"matrix": [2, 14], "x": 13, "y": 0},
{"matrix": [0, 13], "x": 14, "y": 0},
{"matrix": [0, 14], "x": 15.25, "y": 0},
{"matrix": [0, 15], "x": 16.25, "y": 0},
{"matrix": [1, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [1, 1], "x": 1.5, "y": 1},
{"matrix": [1, 2], "x": 2.5, "y": 1},
{"matrix": [1, 3], "x": 3.5, "y": 1},
{"matrix": [1, 4], "x": 4.5, "y": 1},
{"matrix": [1, 5], "x": 5.5, "y": 1},
{"matrix": [1, 6], "x": 6.5, "y": 1},
{"matrix": [1, 7], "x": 7.5, "y": 1},
{"matrix": [1, 8], "x": 8.5, "y": 1},
{"matrix": [1, 9], "x": 9.5, "y": 1},
{"matrix": [1, 10], "x": 10.5, "y": 1},
{"matrix": [1, 11], "x": 11.5, "y": 1},
{"matrix": [1, 12], "x": 12.5, "y": 1},
{"matrix": [1, 14], "x": 15.25, "y": 1},
{"matrix": [1, 15], "x": 16.25, "y": 1},
{"matrix": [2, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [2, 1], "x": 1.75, "y": 2},
{"matrix": [2, 2], "x": 2.75, "y": 2},
{"matrix": [2, 3], "x": 3.75, "y": 2},
{"matrix": [2, 4], "x": 4.75, "y": 2},
{"matrix": [2, 5], "x": 5.75, "y": 2},
{"matrix": [2, 6], "x": 6.75, "y": 2},
{"matrix": [2, 7], "x": 7.75, "y": 2},
{"matrix": [2, 8], "x": 8.75, "y": 2},
{"matrix": [2, 9], "x": 9.75, "y": 2},
{"matrix": [2, 10], "x": 10.75, "y": 2},
{"matrix": [2, 11], "x": 11.75, "y": 2},
{"matrix": [2, 12], "x": 12.75, "y": 2},
{"matrix": [2, 13], "x": 13.75, "y": 1, "w": 1.25, "h": 2},
{"matrix": [3, 0], "x": 0, "y": 3, "w": 1.25},
{"matrix": [3, 1], "x": 1.25, "y": 3},
{"matrix": [3, 2], "x": 2.25, "y": 3},
{"matrix": [3, 3], "x": 3.25, "y": 3},
{"matrix": [3, 4], "x": 4.25, "y": 3},
{"matrix": [3, 5], "x": 5.25, "y": 3},
{"matrix": [3, 6], "x": 6.25, "y": 3},
{"matrix": [3, 7], "x": 7.25, "y": 3},
{"matrix": [3, 8], "x": 8.25, "y": 3},
{"matrix": [3, 9], "x": 9.25, "y": 3},
{"matrix": [3, 10], "x": 10.25, "y": 3},
{"matrix": [3, 11], "x": 11.25, "y": 3},
{"matrix": [3, 12], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [3, 13], "x": 14, "y": 3},
{"matrix": [3, 14], "x": 15.25, "y": 3},
{"matrix": [4, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [4, 1], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [4, 2], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [4, 6], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [4, 10], "x": 10, "y": 4, "w": 1.25},
{"matrix": [4, 11], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [4, 12], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [4, 13], "x": 14.25, "y": 4},
{"matrix": [4, 14], "x": 15.25, "y": 4},
{"matrix": [4, 15], "x": 16.25, "y": 4}
]
},
"LAYOUT_68_iso_split_rshift": {
"layout": [
{"matrix": [0, 0], "x": 0, "y": 0},

View file

@ -0,0 +1,18 @@
# Matrix diagram for Evyd13 solheim68
```
┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐┌───┬───┐ ┌───────┐
│00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │2E │0D ││0E │0F │ │0D │ 2u Backspace
├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤├───┼───┤ └─┬─────┤
│10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D ││1E │1F │ │ │
├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤└───┴───┘ ┌──┴┐2D │ ISO Enter
│20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2D │ │2C │ │
├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤┌───┐ └───┴────┘
│30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D ││3E │
├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴┬──┴┼───┼───┐
│40 │41 │42 │46 │4A │4B │4C │ │4D │4E │4F │
└────┴────┴────┴────────────────────────┴────┴────┴────┘ └───┴───┴───┘
┌────────┐ ┌──────────┐
│30 │ 2.25u LShift 2.75u RShift │3C │
└────────┘ └──────────┘
```

View file

@ -1,4 +0,0 @@
#pragma once
#define LAYER_FN
#define LAYER_NUMPAD

View file

@ -1,79 +0,0 @@
#include QMK_KEYBOARD_H
#include "konstantin.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Base layer
*
* Esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10F11F12PScSLkPau
*
*
* ` 1 2 3 4 5 6 7 8 9 0 - = Bspace InsHomPgU
*
* Tab Q W E R T Y U I O P [ ] DelEndPgD
* Ent
* FnCaps A S D F G H J K L ; ' \
*
* LSftRAG Z X C V B N M , . / RShift
*
* LCtlLGuiLAlt Space RAltRGuiFnFLRCtl
*
*/
[L_BASE] = LAYOUT_tkl_iso(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS,
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN,
FN_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
KC_LSFT, RAL_RGU, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, FN_FNLK, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
/* Fn layer
*
* NumMut
*
*
* F1 F2 F3 F4 F5 F6 F7 F8 F9 F10F11F12 Clear PlyStpVo+
*
* M4 M2 M M1 M3 M5 UCM PrvNxtVo-
*
* M M M MW
*
* MA0MA2MWMW App PgU
*
* DtPRDtNA MW HomPgDEnd
*
*/
[L_FN] = LAYOUT_tkl_iso(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD, KC_MUTE,
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, CLEAR, KC_MPLY, KC_MSTP, KC_VOLU,
KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_NEXT, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD,
_______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP, _______, _______, _______, _______, KC_PGUP,
_______, DST_P_R, DST_N_A, KC_WH_D, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END
),
/* Numpad layer
*
* Num
*
*
* P7 P8 P9 P- =
*
* P4 P5 P6 P+ ( )
* PEnt
* P1 P2 P3 P* ×
*
* P0 P0 , P. P/ ÷
*
*
*
*/
[L_NUMPAD] = LAYOUT_tkl_iso(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD, _______,
_______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, KC_PMNS, MINUS, EQUALS, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, KC_PPLS, L_PAREN, R_PAREN, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PAST, TIMES, _______, KC_PENT,
_______, _______, _______, _______, _______, _______, _______, KC_P0, KC_P0, COMMA, KC_PDOT, KC_PSLS, DIVIDE, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
};

View file

@ -1,17 +0,0 @@
# Generic features
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
COMMAND_ENABLE = yes
CONSOLE_ENABLE = yes
EXTRAKEY_ENABLE = yes
MOUSEKEY_ENABLE = yes
NKRO_ENABLE = yes
TAP_DANCE_ENABLE = yes
UNICODEMAP_ENABLE = yes
# Keyboard-specific features
VIA_ENABLE = yes
# Firmware size reduction
GRAVE_ESC_ENABLE = no
MAGIC_ENABLE = no
SPACE_CADET_ENABLE = no

View file

@ -1,19 +0,0 @@
/* Copyright 2019 Brandon Schlack
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define USE_LEDS_FOR_LAYERS
#define STOPLIGHT_LED

View file

@ -1,170 +0,0 @@
/* Copyright 2019 Brandon Schlack
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#include "brandonschlack.h"
// LEDs
#define TOP_LED B1
#define MIDDLE_LED B2
#define BOTTOM_LED B3
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT(
KC_HOME, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
KC_PGDN, HY_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, PLY_FN1,
KC_LOPT, KC_LCMD, SPC_RAI, KC_LCTL, SPC_RAI, KC_RCMD, KC_ROPT
),
[_FN1] = LAYOUT(
KC_MUTE, QM_MAKE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MC_LHPD, MC_SLPD,
KC_VOLU, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, KC_DEL,
KC_VOLD, RGB_TOG, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, _______, _______, KC_MPRV, KC_MNXT, KC_PGDN, KC_UP, KC_MPLY,
_______, RGB_LYR, RGB_THM, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, RGT_SFT, _______,
_______, _______, _______, _______, _______, _______, _______
),
[_FN2] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______
),
[_ADJUST] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______
)
/*
[_BLANK] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______
)
*/
};
#ifdef STOPLIGHT_LED
bool is_led_stoplight_active = false;
uint8_t led_stoplight_index = 0;
uint16_t led_stoplight_timer = 0;
void matrix_scan_led_stoplight(void);
void led_stoplight_start(void) {
writePinHigh(TOP_LED);
writePinHigh(MIDDLE_LED);
writePinHigh(BOTTOM_LED);
is_led_stoplight_active = true;
led_stoplight_timer = timer_read();
};
void led_stoplight_set(pin_t pin) {
writePinLow(pin);
};
void led_stoplight_end(void) {
// Reset timer and status variables
led_stoplight_index = 0;
is_led_stoplight_active = false;
led_stoplight_timer = 0;
led_update_kb(host_keyboard_led_state());
};
void matrix_scan_led_stoplight(void) {
if (is_led_stoplight_active) {
if (timer_elapsed(led_stoplight_timer) > (1000 * (led_stoplight_index + 1))) {
switch (led_stoplight_index){
case 0:
led_stoplight_set(TOP_LED);
led_stoplight_index++;
break;
case 1:
led_stoplight_set(MIDDLE_LED);
led_stoplight_index++;
break;
case 2:
led_stoplight_set(BOTTOM_LED);
led_stoplight_index++;
break;
default:
led_stoplight_index = 0;
is_led_stoplight_active = false;
led_stoplight_timer = 0;
led_update_kb(host_keyboard_led_state());
break;
}
}
}
};
#endif
void keyboard_post_init_keymap(void) {
#ifdef STOPLIGHT_LED
led_stoplight_start();
#endif
};
void matrix_scan_keymap(void) {
#ifdef STOPLIGHT_LED
matrix_scan_led_stoplight();
#endif
};
#ifdef USE_LEDS_FOR_LAYERS
// example of how to use LEDs as layer indicators
static uint8_t top = 0;
static uint8_t middle = 0;
layer_state_t layer_state_set_keymap(layer_state_t state) {
top = middle = 0;
state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
switch (get_highest_layer(state)) {
case _FN1:
top = 1;
break;
case _FN2:
middle = 1;
break;
case _ADJUST:
top = 1;
middle = 1;
break;
default: // for any other layers, or the default layer
break;
}
return state;
}
// override kb level function
bool led_update_user(led_t usb_led) {
if (!is_led_stoplight_active) {
writePin(TOP_LED, !top);
writePin(MIDDLE_LED, !middle);
writePin(BOTTOM_LED, !usb_led.caps_lock); // still use bottom for Caps Lock
};
return false; // we are using LEDs for something else override kb
}
#endif

View file

@ -1,8 +0,0 @@
# Build Options
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
VELOCIKEY_ENABLE = no